Agglomerated welding flux combines all the raw materials to produce a dry mixture that is then bonded by a liquid binder such as potassium silicate or sodium silicate. The mixture is baked at low temperatures and sieved to attain a specified particle size.
(1) The residue after welding flux soldering is corrosive to metal, so it should be cleaned with water or wiped with a damp cloth immediately after tinning.
(2) Do not get into eyes or mouth, please rinse with water after contact with skin.
(3) welding Flux products are corrosive to metals.
Phoenix welding fluxes are delivered in protective packaging to meet the needs of normal transportation, handling, and storage. Attention should be paid to ensure that transportation and storage conditions are dry and appropriate for this type of product. If the original package has been open for more than 24 hours, is damaged, or if it has been stored for extended periods then the welding flux should be re-dried before welding.
The utility model relates to the technical field of bauxite, in particular to a material conveying device produced by bauxite supplier bauxite. Bauxite, also known as bauxite or bauxite, is mainly composed of alumina, which is hydrated alumina containing impurities. It is an earthy mineral, mostly white or off-white. Bauxite is extremely difficult to melt, insoluble in water, but soluble in sulfuric acid or sodium hydroxide solution, and is mainly used for aluminum smelting and refractory production. The existing material conveying device has the disadvantages of serious dust flying during feeding, great environmental pollution, impact on workers' health, and inconvenience to use.
Sintered flux manufacturers share that sintered flux is an excellent, environmentally friendly and energy-saving flux. It refers to the prepared wet flux, which is calcined at a high temperature of 750~1000℃ to produce the required fine solder particles, which is called sintered flux. So what are the characteristics of sintered flux? Let's take a look with the sintered flux manufacturer below. General characteristics: The melting point of the flux is relatively low, the bulk density is relatively large (usually 1.0-1.8g/cm3), the particle size is uneven, but the strength is relatively high.
Sudden and extreme rains caused Xiaoguan Town in Gongyi City to be immersed in floods. Infrastructure, farmland, and houses were damaged, electricity, communications, water supply, and gas were interrupted. For a time, several towns and villages became isolated islands and many people. In a difficult situation, daily necessities are in short supply.
Zhengzhou Phoenix New Material Technology Co., Ltd commenced operations in mid 2014 with completely new facilities incorporating the latest process designs drawing on the best production technology from around the world. It has already grown to be the leading manufacturer of welding consumables for submerged arc welding. Located in Gongyi City, Zhengzhou, on a site of more than 100,000 sqm